What is the difference between a fan oven and a multifunction oven?

A fan-assisted oven has a fan at the back, while some additional heating elements are at the oven’s top and bottom. On the other hand, a multifunction oven has a heating element and a fan behind this heating element which evenly distributes the heat being generated.

You needn’t turn the oven on to find out if it’s fan-equipped, however there should be a little fan symbol on the outside: a three-pronged fan for a fan assisted oven, and a three-pronged fan inside a circle for a fan oven.

Temperature Difference Between Fan Oven And Conventional Oven. A fan oven has an interior fan that circulates hot air cooking food quickly and more evenly. A conventional oven uses radiant heat from burners or heating elements without a fan to recirculate heated air.

Turn the whole cooktop off by touching the ON/OFF control. H will show which cooking zone is hot to touch. It will disappear when the surface has cooled down to a safe temperature.

Turn ON the power to the Appliance, depress OK button for 3 seconds, the Timer Override light will be turned on and the oven enters into Manual Mode. To select the desired function, push the Function Selection Knob and the knob will pop up. Turn the knob in any direction to select the desired function.

Rangemaster. To set the time, turn and hold the Timer knob to the clock symbol and at the same time turn the Adjusting knob left or right until the clock shows the time of day. Remember this is a 24-hour clock. Let go of the Timer knob and it will spring back to the vertical, oven manual setting.

A padlock symbol has appeared on the timer To activate /deactivate the key lock press and hold the plus button for approx 5 seconds. The keylock will disappear and the clock can be adjusted.

Using your induction hob Place your induction pan on the hob ring you wish to use. Hold your finger down on the power switch located on the appliance. Start cooking by selecting the sensor which relates to the ring you wish to use. Adjust the heat by pressing the + and sensors.

Check the Breaker A damaged or compromised breaker is the most common cause of performance problems. Check the breaker and reset it to see if the oven is working. If the breaker smokes or burns again, stop using the appliance and call an expert.

The Burner Has Malfunctioned If your appliance is not turning on, there might be a problem with the induction burner. Maybe the coils have gone kaput or there are cracks in the glass surface. To inspect if your burner is faulty, you will have to remove the glass surface of the cooktop.

How do I find the model number on my Belling Cooker? For Belling cookers and ovens, the Data Plate can usually be found inside the oven door, on the bottom right hand side affixed to the cookers body. If you cannot find it there, it can also be found on the back of the appliance’s body.