How heavy is a microwave?
-
How heavy is a microwave?
-
How heavy is an over the range microwave?
-
How do I get the child lock off my Frigidaire microwave?
-
Do GE over the range microwaves come with mounting brackets?
-
Are all under cabinet microwaves the same size?
-
How do I do a hard reset on my GE microwave?
-
Does GE microwave control panel light up?
-
How do you remove a built in GE microwave trim kit?
-
Do you need an electrician to disconnect a cooker?
On average, microwave ovens can weigh up to 55 pounds. However, the size and weight of microwaves also vary based on their types and manufacturers. A small countertop microwave can weigh only 20 pounds, whereas; the heaviest commercial microwaves weigh over 100 pounds.
From this dataset, over the range microwaves weigh between 54lbs to 71lbs with the average clocking in at an even 60lbs.
To unlock the controls, press DELAY START again for 3 seconds, and the indicator light will go out. Press DELAY START until the display window displays “loc”. To unlock the controls, press DELAY START until “loc” is no longer displayed in the displaystatus window.
Each microwave comes with the mounting hardware (mounting bracket, screws, exhaust adapter), top and rear templates, and installation instructions needed to complete the installation process.
Widths can range from about 21 to 25 inches. If you’re installing in cabinets, a trim kit will usually bring the width to 27 or 30 inches. Height is usually around 12 to 15 inches. Closed-door depths range from roughly 16 to 20 inches.
Perform a hard reset. Pull the plug out of the wall power supply, and wait a moment. Plug the GE microwave back into the wall power supply to reset any anomalies with the microwave’s memory. You will need to reset the time of day if you perform a hard reset.
Microwave control panels are not generally backlit, which means that the lettering on the keypads do not have lighting behind them.
Insert a screwdriver behind the trim kit at the bottom. Pry it out slightly. Insert the screwdriver at the top and pry it out slightly. When the kit becomes loose, pull it off the cabinet with both hands.
“Yes you will need a qualified Electrician. The circuit needs to be isolated then tested to disconnect and reconnect cooker. It is extremely dangerous if this procedure is not done correctly.”
