Is IFB better than Bosch?

Features: On paper, both IFB, as well as Bosch, have similar features. They have named the technologies differently but in all work solve the same problem. However, as I said above, Bosch has a better build quality. Hence, I personally feel that their machines make less noise and vibrations compared to IFB.

The thermal fuse cuts off power to the microwave if the microwave overheats. To determine if the thermal fuse has blown, use a multimeter to test it for continuity. If the fuse does not have continuity, replace it. The thermal fuse cannot be resetif the fuse is blown, it must be replaced.

Wipe away the condensation after cooking. Why is the ‘E-3’ error message showing? If an error message is displayed, switch the appliance off and on again; if the message disappears, it was a one-off problem. If the fault occurs again or the error message is still displayed, please contact customer support.

Bosch warrants that the Product is free from defects in materials and workmanship for a period of three hundred and sixty-five (365) days from the date of purchase. The foregoing timeline begins to run upon the date of purchase, and shall not be stalled, tolled, extended, or suspended, for any reason whatsoever.

If a microwave fuse keeps blowing, it may be because the fuse is not being installed correctly or that the wrong type of fuse is being installed. Microwave parts like door switches or the magnetron, if defective or wrongly installed, will also cause microwave fuses to continuously blow.

KEY TAKEAWAYS: Microwaves can stop responding due to software glitches or unintended microwave settings. Press the cancel/reset button to do a soft reset on your microwave. If necessary, perform a hard reset by unplugging your microwave for 30 minutes, then plug it back in.

To talk to one of our advisors, please call 0344 892 8979, choose from one of the following options in the table below, and a member of our customer service team will assist you further with your query.

Remove the fuse from its holder. In some cases you may need a small screwdriver to unscrew the fuse holder cap. Look at the fuse wire. If there is a visible gap in the wire or a dark or metallic smear inside the glass then the fuse is blown and needs to be replaced.

If your microwave is relatively new and the repair costs less than replacing it, the fix is worth it. But are microwaves worth repairing if something major is broken? Probably not. Consider getting a replacement appliance for about $100, which should work for 7 to 10 years.

To Exit Demo Mode: Press Start/Reset for 3 seconds. The display will then show 0:01 and the Normal Wash LED will turn off.

The thermal fuse cuts off power to the microwave if the microwave overheats. To determine if the thermal fuse has blown, use a multimeter to test it for continuity. If the fuse does not have continuity, replace it.