Why is my oven door still locked after cleaning?

Wait for It to Cool Down Your oven heats up to around 900F during the self-cleaning cycle. After the cycle has finished, the lock will stay engaged until the oven has cooled down to a safe temperature. Since ovens are designed to keep heat in as efficiently as possible, this can take a while.

To unlock an oven, hold down the Lock button on your control panel for 2 or 3 seconds and wait for the oven to beep to indicate it’s unlocked. If this doesn’t work, unplug it from the electrical outlet and wait a few minutes. Then, plug it back in again, which may reset the temperature gauge and cause it to unlock.

Press the Self Clean pad. Close the oven door. Slide the latch to lock the oven door. Hit the Clear/Off or Cancel button immediately.

If you’re unable to open the oven door when the self-cleaning is over, your door lock/motor assembly may be malfunctioning. First, try to reboot the oven by unplugging it, waiting 5 minutes, and plugging it back in: sometimes this resets the lock and your oven door will be back to normal.

If your oven has a manual lock (a door latch handle that you can slide from left to right), do not manually lock the oven when using other functions. If your oven has an automatic lock, it should only engage during the self-clean cycle.

The F90 is the door lock code. this can be precluded by a self cleaning cycle:-) Try to unplug the range, wait 1 minute. Turn the range back on, while holding in on the oven door, start another self clean.

The F90 code means the electronic oven control board detects a problem with the door lock system. Watch this troubleshooting video to learn how to examine the components in the door lock systemincluding the control board, wiring and oven door lock motor assemblyand find out which part has failed.

Once the oven is locked, the current time of day will appear in the display. To cancel the oven Lock feature, press Off and hold for 6 seconds. The control will unlock the oven door and resume normal operations. Was this article helpful?

Oven locks are a mechanical feature that allows you to secure your oven door. Typically the oven lock only really needs to be engaged if you don’t want young ones opening the door while the appliance is on or when the self-clean function is running to keep everyone safe from the extreme heat.

The error code 90 is a message heavily reliant on the internet connection, and it is possible that the communication has been severed from your end. Check your internet router for any blinking lights indicating any network issues. Connect your phone or tablet to your WiFi and check whether it is properly functioning.

To set the oven Lock feature (instructions may vary by model check your Owner’s Manual for more details): Press OFF and hold for 6 seconds. Lock will appear in the display, the door locked indicator light will flash, and the door lock will begin to close. Allow about 15 seconds for the oven door to lock.

It is an important safety feature for a gas or an electric oven, particularly if one has young children in the house. Some ovens have a lock that is already built into the oven door; other ovens lack this feature, but a lock can be bought relatively cheaply at many stores.

Door is locked when starting or using the oven Turn the power off at the circuit breaker or fuse box for one minute, then turn the power back on. Allow the oven to cool, approximately 30-90 minutes, move the latch arm to the left to unlock the door.

If you’re unable to open the oven door when the self-cleaning is over, your door lock/motor assembly may be malfunctioning. First, try to reboot the oven by unplugging it, waiting 5 minutes, and plugging it back in: sometimes this resets the lock and your oven door will be back to normal.

This code can appear when you try to lock or unlock the oven door, or when you try to run a self-cleaning cycle. The F90 code means the electronic oven control board detects a problem with the door lock system.