Why is my gas oven not working but my stove is?

In most common cases, this specific issue means that the broil element and the baking element remain functional. However, there’s probably a blown internal fuse. If it’s not the fuse, it could be the temperature sensor, broken or frayed wiring, or even a breakdown of the oven control board.

To activate: Press the Lock Controls pad for three seconds to lock or unlock the control. On some models, the Lock Control pad is not visible. For these models, press the COOK TIME and TIMER ON/OFF pad for three seconds to lock or unlock the control. Cancel/Off is always active, even when the control is locked.

If the stove works fine but the oven is not heating up, it means the baking and broils elements are functional but you may have a blown internal fuse case. Our experts assured that there could be several other reasons and there are some solutions worth your consideration: Check power outlet.

Locate the pilot in the back of the compartment. The pilot is attached to the left side of the oven burner. To light the oven pilot, push in and hold the oven control knob in for 1 minute before releasing. Put a lit match next to the pilot so that the pilot will ignite.

Appliance Express. August 2, 2021. Oven Repair. If your GE oven is showing an F7 error code, it means that there is an issue with the key panel. Often the issue is that the oven is detecting that buttons are stuck or being pressed down at the same time.

If the power cord is connected and plugged in securely, your appliance power cord connection may be wired improperly. On electric coil burner models, check the burner. If one burner does not heat, remove it and plug it into another burner receptacle of the same size. Then, turn it on and see if it now heats up.

Here are a couple of basic conversion tips: Adjust the temperature by 25 degrees. Reduce the oven temperature of a standard recipe by 25 degrees if using a convection oven. If a recipe calls for baking at 350 degrees in a still oven, reduce the temperature to 325 if baking in a convection oven.

To unlock the control panel, press and hold CONTROL LOCK for 3 seconds. The indicator light will turn off, and the appliance is ready for use.

GE Oven Bake Not Working The bake element may be damaged. The oven controls may not be correctly set to the bake or broil functions. The oven door may be in the locked position in self-clean ranges. The oven knobs may be in the wrong position.

If the range or oven is receiving power but doesn’t work, the unit may have its own fuse or circuit breaker assembly. This assembly is usually located under the cooktop of the range.

Turn the circuit breaker to the OFF position or remove the fuse. Wait one minute, then turn the circuit breaker back to the ON position or install the fuse to reset power to the unit. This should reset the electronic controls on the range or wall oven.

If your GE oven is showing an F7 error code, it means that there is an issue with the key panel. Often the issue is that the oven is detecting that buttons are stuck or being pressed down at the same time.

The control panel may be locked to prevent the oven from being accidentally started or used by children. To activate the lock-out: Press and hold the Clear/Off for about 3 seconds to lock and un-lock. When the control panel is locked, “Control is LOCKED” will be displayed briefly any time a button or dial is pressed.

Yes, your gas oven should turn on after a power outage. Old and new models of gas ovens will turn back on after a power outage and if it doesn’t, the possible issue is often traced to the circuit breaker. If your gas oven is on, the igniter senses the gas flow, and it will ignite the burner once the power is restored.

The Lock Controls feature on an electric, gas or dual fuel range locks out the oven control panel so that pressing the pads does not activate the electronic controls. This will not keep you from using surface burners that are controlled by knobs.